You can choose different options of the set using the configurator below.
a force control system that guarantees simple programming and a high level of security
interface with LED display and programming menu
auto-closing function after time
photocell input
input for manual control button
| power supply: | 230-240 VAC 50/60Hz ±10% |
| maximum speed of gate movement: | 180 mm/s |
| protection class: | IP-20 |
| work intensity (cycles per hour): | 4 min. ON, 36 min. OFF |
| working temperature: | -20 °C to +40°C |
| total length with head and handle: | 3480 mm, 2×1.65 folding rail with toothed belt |
| trolley drive mechanism: | flexible timing belt, fatigue resistant, wear resistant |
| maximum stroke of the trolley: | 2820mm |
| nominal traction force: | 350N |
| maximum pulling force: | 800N |
| maximum door area: | 12,6m2 |
| maximum gate width: | 5000 mm |
| overload protection: | programmable with the possibility of adjusting the overload threshold value in the range of 3-1, reverse and stop when closing, stop when opening |
| emergency power supply: | connector for an external battery 24V / 3.5Ah |
| accessory power output: | +12VDC max. 800mA |
| signaling output (lamps): | +35VDC max. 500mA, active while the engine is running |
| wall button control: | NO input, SBS mode operation |
| input for safety devices, number and type: | photocells and open door sensor, 2 NC type |
| auto-closing time: | 1-9 minutes, adjustable every 1 minute. |
| photo input operating mode: | reverse when closing |
| frequency: | depending on version 433MHz or 868MHz |
| antenna: | wire |
| remotes memory: | 20 DTM433MHz or DTM868MHz series remote controls depending on the version |
| user interface: | based on a seven-segment LED display and four buttons |
| controller: | with integrated radio receiver |
| programming the controller: | in the learning process with manual force correction |
| possibility of manual opening / closing and locking the gate: | yes |
| additional door locking required: | no, the drive mechanism is self-locking |
| safety: | meets the requirements of the restrictive European standard EN 12453 for safety use of power operated doors |
| programming the driver force: | precise electrical parameters selected during learning ensure fast, quiet and safe work |
| built-in security mechanisms: | anti-crush mechanism – when the actuator meets resistance, it immediately changes its direction of movement |
| control from the manual control button on the controller housing: | in SBS mode |
| control from an additional manual control button: | in SBS mode |
| radio control from the remote control: | only one button in SBS mode |
| the ability to erase the entire memory of remote controls: | yes |
