regulation minimized by eight dedicated operating modes
testing photocells before gate movement
soft start and stop
smooth adjustment of actuators power
residual time memory
optional radio control card
| power supply: | 230VAC 50Hz ±10% |
| power consumption at rest: | 8VA |
| operating temperature (min./max.): | -20°C /+55°C |
| the dimensions of the controller board (width x depth x height): | 108x162x54mm |
| the dimensions of the controller’s housing(width x depth x height): | 180x95x241mm |
| housing: | surface-mounted, IP-55 |
| weight: | 1,2kg |
| output of the actuator (voltage / maximum power) built-in capacitor / quantity): | 230V AC / 2 x 350W / none / 2 |
| power regulation of actuators: | electronic with potentiometers |
| output of the signaling lamp: | relay (max 230VAC / 6A) and OC type (max 24VDC / 6W) |
| peripheral power output (photocells, etc.): | 24VDC / 0,5A |
| power supply of photocell transmitters: | typu OC (see photo test function) |
| gate electric-lock output: | 12VDC, switched on for 8s at the start of opening |
| additional output: | relay (potential-free), max. 1A/30VAC/DC, operating in bistable or monostable mode, with 4s turn-on time |
| photocell input / number: | type NC / 3 |
| manual input OPEN A, OPEN B, OPEN C: | type NO |
| manual STOP control input: | type NC |
| regulation of opening, closing and phases soft start and stop: | max 255s with an accuracy of 1s – learning function |
| regulation of self-closing time: | 1s to 120s using a potentiometer |
| regulation of the delay time between the wings: | 1s to 15s using a potentiometer |
| user interface: | implemented based on rotary potentiometers, multiswitch type DIP-SWITCH and LEARN microswitch with LED diode |
| the ability to turn off the internal interruption signaling lamp: | yes |
| auto-closing function: | yes, in the appropriate controller mode |
| photo-closing function: | yes, with a delay time of 5s, in the appropriate operating mode |
| photo test (testing of photocells before movement of the gate): | yes |
| photocell modes: | in accordance with the controller’s operating mode set |
| learning function: | two modes (simplified, extended) |
| initial activation of the signaling lamp: | yes, 5s before the gate movement |
| radio control: | in option, through the radio connector available on the board |
| pedestrian entry function: | yes, in the appropriate mode of operation |
| full force at the start and push after closing: | yes |
