en LOGINHelp

MARK industrial receiver

3 outputs NO 16A
two-way communication
230V AC power supply

MARK is an industrial, bidirectional 3-channel radio receiver designed to work with gate controllers, roller shutters and other automation devices, where it is required to give a control impulse over long distances. Thanks to the two-way communication, it is possible to send to the transmitter a return signal transmission, which is a confirmation of channel control. The receiver is powered by 230V AC. Supplied in a surface-mounted housing with IP66 tightness for outdoor installation. Dedicated to work in industrial automation, in halls and warehouses.

Most important features

  • confirmation of channel activation

  • work on the 868MHz frequency in the CSS system

  • housing for outdoor mounting

  • memory of 150 remote controls

Basic parameters

power supply: 230V AC, 50Hz
system: CSS
working frequency: 868.30MHz/868,45MHz
type of communication: bidirectional
working temperature: from -20°C to +55°C
receiver board dimensions: 100x140x40mm
outer dimensions of the housing: 150x190x75mm
housing: splash-proof plastic, IP66
mounting method: outdoors or in housings of other devices

Executive elements

relay outputs: 3 NO type (AC1 = 16A/250V AC; AC15 = 1,5A/240V; AC5 = 0,5kW 240V AC, single phase motor; DC1 = 16A/24V DC; DC13 = 0,1A/250V)
operating modes of outputs: monostable, bistable or momentary
adjustment of the output hold time in monostable mode: 0.5 / from 1 to 6553s / from 1 to 109 min.
inputs: 3 control NO type


Radio parameters

radio module: analog-digital with ultra-low power consumption
transmission protection: 128-bit AES
type of modulation / frequency: CSS / 868MHz
antenna input impedance: 50 Ω
antenna: rod antenna, terminals for connecting an external antenna


user Interface: hardware interface on seven LEDs and three buttons, supporting a simple menu
remote configuration: the ability to assign any of the three receiver channels to any CSS remote control
confirmation of channel control: thanks to two-way communication, the receiver sends a return signal transmission to the transmitter, which confirms the channel control
receiver management: with buttons and by connecting to a computer


DTM System Daniel Kujawski spółka komandytowo-akcyjna
85-145 Bydgoszcz, ul. Brzeska 7 tel./fax +48 52 340 15 83 lub 84, NIP: 9532648396,
REGON:361052098, KRS: 0000948678, Sąd Rejonowy w Bydgoszczy, XIII Wydział Gospodarczy KRS
z pokrytym w całości kapitałem zakładowym 3 211 000 PLN

projekty unijne